Thermostat operation guide
CRW Thermostat Instructions.pdf (click to print or
view pdf instructions)
Heating
Press second button (heat/cool mode), #1 is
heating, (little flame icon on the screen) Than press +/- button
Than you can raise of lower the temperature setting using
arrow button Once it stops blinking, temperature is set
Cooling
Press +/- button, than press again, #2 is the cooling
(little snowflake on the screen) Use arrow button to raise or lower the
temperature setting
Once it stops blinking, temperature is set
Important note:
When in heat mode the cooling temperature must be set 10
degrees above your heating set point.
When in cooling mode the heat temperature must be set 10
degrees below the cooling set point.
The heat set point must always be lower regardless of
seasonal temperature.
How to know if system is set in heating or cooling mode
(little flame icon on the screen) Heating Mode
(little snowflake on the screen) Cooling Mode
On the screen, the default number that is showing is the
temperature of the room.
If system is in cooling, the snowflake icon will be showing, if system is in
heating, it will show the flame icon.
To set which mode you want thermostat to be in:
Press second button, heat/cool mode
Use arrow up and down button to select heating or cooling
icon. The one that is blinking is the active one.
Additional note: There are limits to the system
which are preset. When the outside temperature is above 75 degrees, you
will not get heat.
When the outside temperature is below 60 degrees, you will not get cooling